09

2023

-

02

Hydrometallurgy reactor factory introduces Hydrometallurgy reactor problem analysis for you

Author:


Hydrometallurgy reactor factory will introduce you to Hydrometallurgy reactor. In the process of using Hydrometallurgy reactor, various problems will inevitably occur. Among them, the slow heating rate during heating is one of the common faults.

Hydrometallurgy reactor factory will introduce you to Hydrometallurgy reactor. In the process of using Hydrometallurgy reactor, various problems will inevitably occur. Among them, the slow heating rate during heating is one of the common faults. Now Xiaobian will analyze the problem of slow micro heating with you:

Hydrometallurgy reactor factory
1. When in use, strictly avoid metal or massive hard objects falling into the kettle to prevent damage to the tank wall.
2. After turning on the power, make the stirring run, and observe whether there is any abnormality in the transmission parts such as the reducer and the stirring.
3. The pressure and temperature of the jacket or inner tank need to be raised and lowered slowly, so as to prevent thermal shock and inner wall bulging, and it is strictly forbidden to approach or exceed the maximum allowable working pressure of the equipment, and it is strictly forbidden to approach or exceed the maximum allowable work of the equipment temperature.
4. When the discharge is blocked by sticky materials, it is forbidden to use metal tools to open it, so as not to damage the inner wall.
5. After discharge, the material adhered to the surface should be cleaned in time, and the temperature difference should be paid attention to when cleaning.
6. Hydrometallurgy reactor factory tells you that in the process of heating up or cooling down, it is necessary to control the temperature difference of the tank wall as much as possible. The cold tank heats the material, and the hot tank adds cold material.

Hydrometallurgy reactor factory,Hydrometallurgy reactor

undefined

undefined