11

2022

-

08

What to look out for when inspecting Hastelloy C276 reactor

Author:


Knowing the precautions of the reactor in detail in advance is also a protective measure for the safety of the reactor and personal safety. So what are the next checks before use? do we need to care something?

Knowing the precautions of the reactor in detail in advance is also a protective measure for the safety of the reactor and personal safety. So what are the next checks before use? do we need to care something?

Hastelloy C276 reactor

1: When the Hastelloy C276 reactor is in use, loosen the bolts on the flange, take out the solution cup and put the solution into the cup, then put it in the kettle body, and assemble the sealing groove on the upper cover and the sealing spherical surface on the cup body. When the bolts are used, the opposite sides should be tightened, and the force should be even. Do not tighten any one bolt at one time. When the bolts on the opposite side are tightened evenly, then tighten all the bolts on the opposite side, and then the operation can be heated up.

2: When the temperature reaches the requirement, prepare to take out the solution cup and loosen the Hastelloy C276 reactor evenly on the opposite side of the bolts. It is not allowed to loosen any bolts at one time, which will damage the sealing groove of the upper cover and the sealing surface of the upper end of the cup body.

3: There is a sealing plug in the center of the outer end of the upper cover, which is used to check the sealing inlet pressure test interface of the solution cup. Do not open the Hastelloy C276 reactor daily or during use to prevent leakage.

4: The material of Hastelloy C276 reactor is selected according to the material. If there is corrosion, please choose corrosion-resistant material.

Hastelloy,C276,reactor

undefined

undefined