06

2023

-

03

Related installation and operation specifications of Buy Alloy 904L Reactor

Author:


Before Buying Alloy 904L Reactor, we need to understand: 1. The autoclave should be placed indoors. When multiple autoclaves are equipped, they should be placed separately. Each operating room should have an outlet directly leading to the outside or passage, and the equipment location should be well ventilated.

Before Buying Alloy 904L Reactor, we need to understand:
1. The autoclave should be placed indoors. When multiple autoclaves are equipped, they should be placed separately. Each operating room should have an outlet directly leading to the outside or passage, and the equipment location should be well ventilated.
2. When installing the lid of the kettle, the sealing surfaces of the kettle body and the lids should be prevented from colliding with each other. Carefully place the lid of the kettle on the kettle body at a fixed position. When tightening the main nut, it must be tightened diagonally and symmetrically several times. The force should be uniform, and the lid of the kettle is not allowed to tilt to one side, so as to achieve a good sealing effect.

Buy Alloy 904L Reactor
3. At the connection of positive and negative nuts, only the positive and negative nuts are allowed to be rotated, and the two circular arc sealing surfaces must not be rotated relative to each other. When all nut pattern joints are assembled, lubricating oil should be applied.
4. The needle-type valve is sealed with a thread. It only needs to turn the valve needle slightly and press the cover tightly to achieve a good sealing effect.
5. Turn the rotating body on the kettle by hand to check whether the operation is flexible.
6. The controller should be placed flat on the operating table. The working environment temperature is 10-40°C, the relative humidity is less than 85%, and the surrounding medium does not contain conductive dust and corrosive gases.
7. Check whether the movable parts and fixed contacts on the front panel and rear panel are normal, pull off the upper cover, and check whether the contact of the connector is loose, and whether there is any damage or corrosion caused by improper transportation and storage.
If you want to Buy Alloy 904L Reactor, please contact our company.

Buy Alloy 904L Reactor,Discount Alloy 904L Reactor,Alloy 904L Reactor suppliers