Alloy 310S reactor
  • Alloy 310S reactor

Alloy 310S reactor

310S reactor;Alloy 310 reactor; 310S equipment;Alloy 310 equipment;310S autoclave


Non Ferrous Metal Reactors

  • Product description
  • Cases
    • Commodity name: Alloy 310S reactor
    • Commodity ID: 1051809827287556096

    310S reactor;Alloy 310 reactor; 310S equipment;Alloy 310 equipment;310S autoclave

    Alloy 310S reactor



    We provides high grade pressure vessel, reactors, heat exchangers, heaters, towers, tanks, columns, condensers, reboilers, separators, evaporators made of Nickel Alloy, Titanium Alloy, Copper-Nickel Alloy, Zirconium, Tantalum Alloy, Super Stainless Steel and clad metals, designed and fabricated according to ASME U, PED. Grade 310 is a medium carbon austenitic stainless steel, for high temperature applications such as furnace parts and heat treatment equipment. 


    • Volume: 1000-5000 liters.
    • Design pressure: maximum up to 50bar
    • Design temperature: Up to 300℃
    • Material:Grade 310S.
    • Heating method: Steam; Oil; Electric;
    • Seal type: Magnetic stirrer drives or mechanical stirring
    • Certificate: GB; ASME U stamp; ISO certified; PED;


    • Chemical Composition:   

    Element Content (%)
    Iron, Fe 54
    Chromium, Cr 24-26
    Nickel, Ni 19-22
    Manganese, Mn 2
    Silicon, Si 1.50
    Carbon, C 0.080
    Phosphorous, P 0.045
    Sulfur, S 0.030



    These grades contain 25% chromium and 20% nickel, making them highly resistant to oxidation and corrosion. Because of its high chromium and moderate nickel content, Alloy 310 is resistant to sulfidation and can also be used in moderately carburizing atmospheres.


    Note: When steel cladding plates adoptted, carbon steel is considered as the high stress strength base plate for resisting the innner pressure!







    Internal fittings

    • Internal heating/Cooling coils: Tube type or spiral coils;
    • Dip tube & temperature measure tube;
    • Shaft, Couplings & combined stirring paddle impeller;
    • Gas distributor & baffles;

    Optional for pressure vessel

    • Full Jacket/ Half-pipe jackets/ Dimpled jackets
    • Head type:Semi-elliptical/ Dished/ Hemispherical/ Flat



    • If there has special process requires, HXHCEM will also customize for you!
      Pls list your basis process parameters like follows:
      1. Reactor volume
      2. Operating Temperature
      3. Operating Pressure
      4. Reactor Material / contacting components material
      5. Agitator type, and the Mixing Speed, motor power request?
      6. With heating device or not? Heating type?
      7. Internal cooling coil or not, exchange area?
      8. Your other requests
      ......Contact us!

                      We like to help you to accomplish your plans.




    1000L, 2000L, 3000L, 5000L, 6000L, 8000L, 10000L, 15000L, 20000L, 25000L.....
    Working pressure
    Negative pressure -0.1~150bar
    Working temperature
    Stirring speed(rpm)
    Heating type
    Oil heating, steam heating, Electric heating
      Head type Semi-elliptical/ Dished/ Hemispherical/ Flat
      Jacket type Full Jacket/ Half-pipe jackets/ Dimpled jackets
    Charging type
    Charging from above, discharging from bottom.
    Stirring type
    Customized propeller, turbine, paddle, anchor, frame, screw belt type. ...etc
    Seal type
    Magnetic seal, mechanical seal,
    Construction materials
    (Wetted parts)
    Stainless steel SUS304, SS316L, SS310S, 321, duplex steel 2205, Titanium, Nickel, Zirconium, Hastelloy C-276, cladding plate.
    Key words:
    • 310S reactor
    • Alloy 310 reactor
    • Alloy 310 equipment
    • 310S autoclave






Online consulting