Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
Bottom drain valves
Pressure: -1(FV) - +200bar
Temperature: 20 °C to +350 °C
Material: SS304, SS316, other alloys
Category：
Accessories for pressure reactors
- Product description
- Cases
-
- Commodity name: Bottom drain valves
- Commodity ID: 152
<span>Voume: </span>5 - 20liters<br/> <span>Pressure: </span>-1(FV) - +200bar<br/> <span>Temperature: </span>20 °C to +350 °C<br/> <span>Material:</span> SS304, SS316, other alloys<br/>
Bottom Drain Valves
Introduction
Bottom drain valves can be added to most Hxchem reactors. These valves are also quite useful for the larger lab vessels which are too large to conveniently lift from the heater for product recovery.
Pressure：Up to 200bar
Temperature：Up to 350℃
Material：Standard SS304 or SS316, or other alloys.
Features
- The standard bottom drain valve has a rising stem, that is flush with the inside cylinder bottom so that there is no dead space between the bottom of the vessel and the shut off point of the valve. In the fully open position the stem is retracted completely to open a clear passage for draining the vessel.
- These valves will withstand the full operating pressures and temperatures of the vessels in which they are installed in the closed position.
Needle Valves and Ball Valves
Needle valves and ball valves can also be installed as bottom outlet valves. Needle valves are generally used on the smaller reactors. While ball valves can be used for large discharge passages, they are generally limited in their operating temperature/pressure capabilities and they leave a fairly large dead space between the bottom of the vessel and the seat of the valve.
Key words:- Bottom drain valves
- Drain Valves
- High pressure valves
Previous
Next
Previous
none
Next
Online consulting
Weihai Huixin Chemical Machinery
Phone:+86-15666305701
Fax:+86-0631-5581768
Email:jerryliu@hxchem.net.cn
Address:No.159,Lili Road,Lingang,Weihai 264200,Shandong,China