Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
Carbon Steel Pressure Reactor
Category：
Non Ferrous Metal Reactors
- Product description
- Cases
-
- Commodity name: Carbon Steel Pressure Reactor
- Commodity ID: 521
Carbon Steel Reactors/ CS reactors/ Carbon steel pressure reactors/ Carbon steel chemical reactors/ Carbon steel jacketed reactors/ Mild steel reactors/ Mild steel pressure reactors
Carbon Steel High Pressure Reactors
Introduction
Carbon steel is an alloy between carbon and iron. Also known as mild steel, carbon steel is one of the most commonly used engineering materials. It is favored because it is relatively cheap and widely available. It also has good tensile strength and ductility. However, carbon steel is not generally resistant to corrosion which can be an issue in many environments.
- Volume: 1000-500000liters.
- Design pressure: maximum up to 200bar
- Design temperature: Up to 350℃
- Material：CS, SS, Duplex SS, Hastelloy B/C, Nickel, Titanium, Zirconium, etc.
- Heating method: Steam; Oil; Electric;
- Seal type: Magnetic stirrer drives or mechanical stirring
Construction of material
-
Q345R: The most common low alloy steel, because of its economical and high stress strength, which is suitable for the low corrosion and high pressure application.
-
15CrMoR: Due to the addition of Cr, Mo and other alloying elements into low carbon steel, the comprehensive properties of steel are greatly improved. It offer good performance to the hydrogen resistance and high temperature application.
- 16MnDR：16MnDR is a kind of low temperature pressure vessel steel plate. Minimum operating temperature can reach to -40℃.
Note: When steel cladding plates adoptted, carbon steel is considered as the high stress strength base plate for resisting the innner pressure!
Optional
Internal fittings
- Internal heating/Cooling coils: Tube type or spiral coils;
- Dip tube & temperature measure tube;
- Shaft, Couplings & combined stirring paddle impeller;
- Gas distributor & baffles;
Optional for pressure vessel
- Full Jacket/ Half-pipe jackets/ Dimpled jackets
- Head type:Semi-elliptical/ Dished/ Hemispherical/ Flat
Customization
- If there has special process requires, HXHCEM will also customize for you!
Pls list your basis process parameters like follows:
1. Reactor volume
2. Operating Temperature
3. Operating Pressure
4. Reactor Material / contacting components material
5. Agitator type, and the Mixing Speed, motor power request?
6. With heating device or not？ Heating type？
7. Internal cooling coil or not, exchange area?
8. Your other requests
......Contact us！
We like to help you to accomplish your plans.
Specifications
Head type Jacket type Key words:- Carbon Steel Reactors
- Carbon steel pressure reactors
- Mild steel reactors
- Mild steel pressure reactors
Previous
Previous
2205 Duplex steel reactor
Online consulting
Weihai Huixin Chemical Machinery
Phone:+86-15666305701
Fax:+86-0631-5581768
Email:jerryliu@hxchem.net.cn
Address:No.159,Lili Road,Lingang,Weihai 264200,Shandong,China